Specifically designed to meet the specific constraints and needs of the medical, hotel, food industry and transport sectors such as aviation, railway, ships, roads (Buses).

The DAF 3000 allows 3 different applications:

1. Disinfection up to 250m3 (bactericidal, fungicidal, virucidal and myco-bactericidal).

Use with Netbiokem DSAM or Ki-ose RTU disinfectant cleaners.

2. Disinsection up to 450m3 (flying and crawling insects).

Use with Emuldry 50 Plus or Airez remanent insecticides.

3. Odor elimination up to 450m3 (organic odor, food, animals).

Use with Aero Odor Eliminator.

1. Clean the room up prior to treatment taking place.

2. Cover any fire alarms and smoke detection systems until the fogging process is complete.

3. Turn all fans and air ventilation systems to off, or as low as possible until the fogging process is complete.

4. Close all external openings (doors and windows) and seal any gaps under & around doors.

5. Open closets and drawers that require treatment.

6. Place the device on a clean and dry surface at a height of 50 cm to 1 m depending on the height of the space to be treated.

7. Install the device near a door and near an electrical outlet.

8. Direct the nozzle (2) towards the centre of the room, with no obstacle within 2 meters. If the room is equipped with and air ventilation circuit, place the device opposite the air suction system.

9. Install and connect the Netbiokem DSAM+ inside the machine.

10. Select the required treatment: Disinsection, Disinfection or odor treatment.

11. Enter the volume to be treated in m3 and press the START button.

12. Exit the room and close the doors. Automatic startup after 45 seconds.

13. Do not enter the room for at least 30minutes after misting has been completed.

14. Start ventilation or aerate the room before entering.

See user manual for more details

NATO NSN codes:

DAF-3000 220V/50hz (EU) 8125-14-5994674 (1 DAF-3000 EU plug F type)

DAF-3000 115V/60hz (US) 8125-14-5994983 (1 DAF-3000 US plug)

DAF-3000 220V/400hz (Aircraft) 8125-14-5994951 (1 DAF-3000 Aircraft plug)

Rinsing Solution for DAF-3000 6840-14-5995151 (1 carton : 6 x 2L jerrycan + 6 x 10 wipes)

Nozzle Kit for DAF-3000 4730-14-5994981 (1 kit for yearly change of the suction nozzle)

Weight: 6.3 kg

Power: 1000 Watts

Flow rate depending on product: 18 to 27ml/min

Product loading: 2 liter drum

Internal material : tube in polyethylene and Inox 316L

External material: polystyrene resin (ABS)

The warranty terms are detailed in the user manual.

Code	Product & Plug Type
AR0006128	DAF 3000 – 220 V / 50 Hz EU Plug – Type F
AR0006127	DAF 3000 – 115 V / 400 Hz Aircraft plug – Type A
AR0005956	DAF 3000 – 115 V / 60 Hz US plug – Type A
AR0006461	DAF 3000 – 220 V / 50 Hz AUS Plug – Type I
AR0006605	DAF 3000 – 220 V / 50 Hz UK Plug – Type G
AR0006142	Succion kit for all models

No information

Rinsing solution is to be used at the end of each working day with DAF-3000.

Remove active ingredient bottle from the DAF3000 and wipe the dip tube.

Install Rinsing Solution bottle and connect it to the DAF-3000 with the dip tube.

Follow instruction of the DAF-3000 for rinsing:

“R” to be pressed to initiate rinsing of the DAF-3000

The rinsing operation time is normally 2’30″

At the end of the rinsing operation, remove the bottle and wipe the dip tube.

Reminder: Do not store or transport the DAF-3000 with a bottle in it, connected or not with the dip tube.

No information

Liquid product:

Appearance: Colourless liquid

Density: 1.0g/ml+-0.1

pH: 6.0 – 7.0

Shelf life: 24 months

Wipes:

100% viscose 60g/m2

60 x 35 mm.

Code	Product	Units/carton	Carton weight (Kg)	Carton dimension (cm)
AR0005847	Rinsing Solution for DAF-3000	6 x 2L bottles of Rinsing Solution & 6 x rolls of 10 compressed wipes	14.0	27 x 28 x 28

• For optimal treatment*, open all the doors. Open and empty the lockers, cupboards and storage units. Close curtains and window blinds. Remove any protective carpet covers if present.

• Turn off the air-conditioning system.

• Spray the diluted product as follows:

° 25mL/m2 on the carpets to achieve a 0,5g/m2 deposit

°10mL/m2 on the other interior surfaces to achieve a 0,2g/m2 deposit.

To treat aircraft cabins and holds, the quantities are:

. BOEING 747B: 25 litres of emulsion at 2%

. BOEING 737: 7 litres of emulsion at 2%

. DOUGLAS DC10: 16 litres of emulsion at 2%

. AIRBUS A300: 10 litres of emulsion at 2%

. AIRBUS A310: 9 litres of emulsion at 2%

• Allow for drying time, from 45 min to 1h (depending upon the temperature and humidity level in the cabin).

*Intensifying or increasing the frequency of cleaning/disinfecting surface areas may compromise the effectiveness of a residual insecticide. Localized aerosol top-up treatment may be necessary, or more frequent residual treatment.

Concentrated formula is diluted in water to obtained a solution with 2% Permethrin.

1 litre of concentrate + 24 litres of water make 25 litres of the ready to use product.

0,4 litre of concentrate + 9,6 litres of water make 10 litres of the ready to use product.

For a better homogenization of quantities exceeding 10 liters, a pre-emulsification is recommended. The dilution water temperature should be between 20 and 40°C.

See TDS for more details.

° AMS 1450

° BSS 7434

° Air France FITS 58-048-01

° Product type 18 – As part of EU Biocidal Products Regulation N°528/2012

Appearance: Liquid, yellow to brown

Odour: Characteristic, Geraniol

Active ingredients: Permethrin 25/75 (N° CAS 52645-53-1), Geraniol (N° CAS 106-24-1)

Flammability: Non-flammable

Shelf life: 2 years

Product Code	Packaging	Units/carton	CO2/units (EXW Paris)
AR0006536	1L dosing bottle	10	159.61Kg

One KILBLAT 250ml aerosol can treat up to 25m² of surface (10 à 12g/m²).

• Wet locations and presence of food are favorable conditions for cockroach development.

• In order to obtain maximum efficiency, it is necessary to carry out a deep cleaning of the aircraft prior to applying KILBLAT.

• All bins must be empty and taken out of the aircraft.

• No food is to be present on board during the treatment.

• Only skilled staff carrying out the treatment should be on board.

1) Start the treatment from the side furthest from the open exit door.

2) Do not forget rails, spaces behind trolleys and trolley wheels.

3) Shake can well before use.

4)Hold the spray “upside down”.

5)

– Single-shot continued spraying:

Press hard on the actuator until it locks.

The spray will be continuous until the can is depleted.

-Multi-shot spraying:

Press slightly on the tab without locking it. Release to stop spraying.

Use KILBLAT at a distance between 20 and 30cm away from the surface to be sprayed.

Spray the surfaces to be treated in a grid pattern, insisting on the places frequented by insects (damp areas or where there is food).

6) One KILBLAT 250ml aerosol can treat up to 25m² of surface (10 à 12g/m²).

7) When applying KILBLAT for the first time, or in a case of an infestation, the procedure must be repeated 3 times, with 2 week interval : 2 to 3 weeks : d0, d15 and d30.

8) KILBLAT can then be applied every 2 to 3 month for maintenance.

° AMS1450

° Boeing D6-7127

° Airbus CML 11ACB1

° NATO NSN: 6840-14-3575883 (Aérosol 400ml – AR0006540)

° Air France FITS 058-02-01

No information

Product code	Product	Units/carton	CO2/unit (EXW Paris)
AR0000045K	KILBLAT 250ml Aerosol	12	352.15Kg
AR0000317	KILBLAT 400ml Aerosol	12	530.00Kg

One KILBLAT HFO 250ml aerosol can treat up to 25m² of surface (10 à 12g/m²).

• Wet locations and presence of food are favorable conditions for cockroach development.

• In order to obtain maximum efficiency, it is necessary to carry out a deep cleaning of the aircraft prior to applying KILBLAT HFO.

• All bins must be empty and taken out of the aircraft.

• No food is to be present on board during the treatment.

• Only skilled staff carrying out the treatment should be on board.

1) Start the treatment from the side furthest from the open exit door.

2) Do not forget rails, spaces behind trolleys and trolley wheels.

3) Shake can well before use.

4)Hold the spray “upside down”.

5)

– Single-shot continued spraying:

Press hard on the actuator until it locks.

The spray will be continuous until the can is depleted.

-Multi-shot spraying:

Press slightly on the tab without locking it. Release to stop spraying.

Use KILBLAT HFO at a distance between 20 and 30cm away from the surface to be sprayed.

Spray the surfaces to be treated in a grid pattern, insisting on the places frequented by insects (damp areas or where there is food).

6) One KILBLAT HFO 250ml aerosol can treat up to 25m² of surface (10 à 12g/m²).

7) When applying KILBLAT HFO for the first time, or in a case of an infestation, the procedure must be repeated 3 times, with 2 week interval : 2 to 3 weeks : d0, d15 and d30.

8) KILBLAT HFO can then be applied every 2 to 3 month for maintenance.

° AMS1450

° Boeing D6-7127

° Airbus CML 11ACB1

° Air France FITS 58-042-01

No information

Product code	Product	Units/carton	CO2/unit (EXW Paris)
AR0006572	KILBLAT HFO 250ml Aerosol	12	0.76Kg
AR0000046	KILBLAT HFO 400ml Aerosol	12	1.22Kg

AIREZ is an emulsifiable concentrate and must be diluted with water in the ratio of 1 litre Airez to 24 litres of water (or 200mls of Airez in 4.8 litres of water). This will give the correct diluted ready to use product and the correct amount of Permethrin (2%) as recommended and specified by the World Health Organisation and by most Quarantine authorities around the world.

Dilution should take place just prior to application. If dilution has been made more than 1 week before application, then mix or shake container before use.

Residual disinsection must only be carried out with approval from the respective Government Health &/or Quarantine Agencies in each country. For flights to Australia & New Zealand, residual Disinsection Treatment must be conducted in accordance with the procedures detailed in the AQIS/MAFBNZ Schedule of Aircraft Disinsection Procedures. Suggested means of application is by compressed air spray guns, fogging apparatus or pressure retaining sprays. Approved aircraft insecticide aerosol should be used to spray the electrically sensitive areas and cockpits.

The following are approximate guides to treat the interior surfaces of both cabin and cargo compartments depending on aircraft models. Usage may vary depending on applicator and equipment used.

A330-200 17L A380-800 35L Boeing 737-8 8L

A330-300 19L Boeing 747 34L

A350-1000 24L Boeing 787-9 20L

Refer to Quarantine procedures or contact our Technical Service

° Boeing D6-7127

° AMS 1450

° Australian Quarantine & Inspection Services

° New Zealand Ministry of Agriculture & Fisheries

° Australian Pesticides and Veterinary Medicines Authority

Appearance colour: Brown liquid

Appearance Transparency: Clear

Density @ 20 Deg.C: 0.45 +/- 0.01

Cloud Point (Deg C): Less than -4 Deg.C

Product Code	Format
4755/30	1L bottle