CH9004 is best used with high pressure (5:1 or 10:1) spray pumps, coupled with high pressure hose and spray wand, using a fan size tip nozzle. For more information, please call your nearest Callington-PSA representative.

1. Remove all oil and dirt with Callington’s CH511C Exterior Aircraft Cleaner, or equivalent, before stripping. The surfaces must be clean and completely dry before treating with a stripper.

2. Optimum results are achieved if hangar temperature is above 25⁰C.

3. Before applying the stripper, cover any sensitive areas that may be damaged by CH9004 like electronics or plastics.

4. Spray or brush CH9004 onto surface to be stripped.

5. Spray Application: Spray an even, medium coat of CH 9004, starting from the bottom of the aircraft and working upward. Approx. 1L/m2 of CH9004 will be used for efficient stripping.

6. Keep the surface wet with CH9004 until the paint starts to buckle.

7. Allow for sufficient contact time (2-9 hours) or more depending on the ambient temperature, paint system and thickness of paint to be stripped. Reapply CH 9004 paint stripper as required.

8.When the paint is starting to lift, agitate the surface area to remove any loose paint.

9.When all paint is lifted, agitate the surface to remove the loosened paint and any residual stripper.

10.For optimal results apply an alkaline cleaning solution (CH087, CH511c or CH8100) to effectively remove any contaminants or paint stripper residual.

11.After finishing the stripping process, collect stripper and paint residue into clean plastic waste bins for disposal as solid waste according to local trade waste regulations.

12. Finally, rinse the surface with high pressure water.

CH9004 meets the corrosivity requirements of :

° Boeing BSS 7432

° Douglas CSD-1

Appearance: Dark Pink smooth paste

Specific Gravity gms/ml at 20⁰C: Approx. 1.05

Flash Point (deg C) PMCC: > 80; non-flammable

pH: 6.5 +/- 1.0

Shelf Life: 18 months in temperatures of maximum 22°C

Code	Packaging	Units/carton
6200/51	20L jerrycan	Each
6200/64	200L drum	Each

CH3003 is best used with high pressure (5:1 or 10:1) spray pumps, coupled with high pressure hose and spray wand, using a fan size tip nozzle.

For more information, please call your nearest Callington representative.

1.Remove all oil and dirt with Callington’s CH087 Exterior Aircraft Cleaner, or equivalent, before stripping. The surfaces must be clean and completely dry before treating with a stripper.

2.Optimum results are achieved if hangar temperature is above 20⁰C.

3.Before applying the stripper, cover any sensitive areas that may be damaged by CH3003 like electronics, magnesium, cadmium or plastics.

4.Spray or brush CH-3003 onto surface to be stripped.

5.Spray Application: Spray an even, light coat of CH3003, starting from the bottom of the aircraft and working upward. Approx. 1L/m2 of CH3003 will be used for efficient stripping.

6.Keep the surface wet with CH3003 until the paint starts to buckle.

7.Allow for sufficient contact time (1-5 hours to overnight on tough coatings) or more depending on the ambient temperature, paint system and thickness of paint to be stripped. Reapply CH3003 paint stripper as required.

8.When the paint is starting to lift, brush the surface area to remove any loose paint.

9.When all paint is lifted, agitate the surface to remove the loosened paint and any residual stripper.

10.For optimal results apply an alkaline cleaning solution (CH087, CH511c or CH8100) to effectively remove any contaminants or paint stripper residual.

11.After finishing the stripping process, collect stripper and paint residue into clean plastic waste bins for disposal as solid waste according to local trade waste regulations.

12.Finally, rinse the surface with high pressure water.

° BSS7432 immersion corrosion test (except Cadmium Plated Steel and Magnesium).

° AMS 1376 immersion corrosion for Aluminium and Titanium Alloys.

° Douglas CSD1

° ASTM F 945

° ARP 1755B

° MIL-R-81903A

Appearance: Green viscous opaque liquid

Density at 20°C: 1.05 ± 0.04g/ml

Flash Point (deg C): > 63 (PMCC)

pH: 2.0 +/- 0.5

Shelf Life: 12 months in temperatures of maximum 22⁰C

Code	Packaging	Units/carton
6300/51	20L jerrycan	Each
6300/64	200L drum	Each

Precaution: CH8930 is damaging to acrylics, most plastics, and composites. Avoid contact to prevent damage.

1. Clean any soiled or oily surfaces prior to stripping.

2. Mask off all Perspex, plastic, and rubber components.

3. To avoid unnecessary evaporation, carry out stripping operation away from direct sunlight or wind.

4. Apply CH8930 by spray or brush. For spraying, use a Graco barrel pump or equivalent.

5. Once paint film has blistered, agitate area with stiff bristle brush if necessary and then rinse off with high pressure water or scrape and rinse off.

No information

° Boeing BSS7432

° AMS 1375

° Douglas CSD1, Type III

° MIL-R-25134C

° MIL-R-81294

Density: 1.19 ± 0.01 g/mL

Colour: Light Amber to Brown

Transparency: Translucent to Opaque

Viscosity at 20°C: 75 ± 15 Ps (Spindle #5, 20 rpm)

Code	Packaging	Units/carton
6600/51	20L jerrycan	Each
6600/64	200L drum	Each

Note: CH207 is damaging to high strength steel magnesium alloys and composites. Some separation in CH207 is to be expected on storage and temperature extremes.

1) Agitate container before opening to ensure contents are well mixed. Clean any extremely soiled or oily surface prior to stripping. Mask off all perspex, plastic and rubber components.

2) Surface should be dry and above 25°C to achieve optimum stripping performance.

3) Apply CH207 by brushing, or by spraying with non-atomising spray equipment (Graco/Wager barrel pump or equivalent).

4) In 10 – 40 minutes (depending on the temperature of the surface), the coating should wrinkle and soften, agitate lightly.

5) If there are some areas where coating has not softened from surface then re-apply CH207 and after a few minutes agitate with a stiff bristle brush. Remove the coating from the surface by scraping and/or with the use of high-pressure water.

No information

° MIL-R-81903A, Type II, Class 1

Color: Amber to brown

Appearance: Viscous translucent to opaque

pH: < 2

Shelf Life: 12 months from manufacturing, in temperatures of maximum 22⁰C

Code	Packaging	Units/carton
6650/51	20L jerrycan	Each
6650/64	200L drum	Each