CH8930 Paint Stripper

Aircraft Paint Stripper (Neutral Phenol)

  • Non-flammable neutral phenolic paint stripper.
  • Removes epoxy and 2 pack coatings, including primer and base coats.
  • Heavy bodied, viscous material – clings to vertical and inverted surfaces.
  • Amber colour, and low odour.
  • Non-corrosive to aluminium, cadmium, high strength steel and all aircraft metal surfaces.
  • Biodegradable formulation.
  • Recyclable Packaging.

CH8930 is a thickened non-flammable, neutral phenolic paint stripper. It quickly and successfully removes Epoxy, Polyurethane and other chemically resistant coatings, primers and base coats from aircraft surfaces.

Precaution: CH8930 is damaging to acrylics, most plastics, and composites. Avoid contact to prevent damage.

1. Clean any soiled or oily surfaces prior to stripping.

2. Mask off all Perspex, plastic, and rubber components.

3. To avoid unnecessary evaporation, carry out stripping operation away from direct sunlight or wind.

4. Apply CH8930 by spray or brush. For spraying, use a Graco barrel pump or equivalent.

5. Once paint film has blistered, agitate area with stiff bristle brush if necessary and then rinse off with high pressure water or scrape and rinse off.

No information

° Boeing BSS7432

° AMS 1375

° Douglas CSD1, Type III

° MIL-R-25134C

° MIL-R-81294

Density: 1.19 ± 0.01 g/mL

Colour: Light Amber to Brown

Transparency: Translucent to Opaque

Viscosity at 20°C: 75 ± 15 Ps (Spindle #5, 20 rpm)

CodePackagingUnits/carton
6600/5120L jerrycanEach
6600/64200L drumEach