The 25x Microscope is a portable and compact direct measuring field microscope. Perfect and convenient for travelling from the desk to the job site for critical inspection and measurement. Each scope includes a focus ring for crisp, clear images. Using the reticle focus adjustment, the 1/20mm scale reticle can be brought into sharp focus when superimposed on the internal image. A clear acrylic base allows the instrument to rest directly on a flat object while passing ambient light.

Two cutaways (180° apart) in the clear base allow fine instruments to touch the object under inspection. The base can be removed to accommodate irregular objects. The base and bottom macro lens can be removed for added flexibility as an erect image 8X telescope for long-distance requirements.

Padded storage case included.

Reticle: 2.5-0-2.5mm, 0.05mm incr.

Note that the focus ring is on the removable macro lens.

A sturdy water spray wash gun meeting MIL-I-6866 and ASTM E 1417 requirements. The Tri-Con gun is available with or without the full jet nozzle that emits coarse spray without air pressure.

Tri-Con nozzles are recommended for penetrant wash stations. The model C125N 1/2HH 25 has been recognised by Boeing and the U.S. military, as the best wash gun/nozzle to use for the removal of excess penetrant before the inspection. These nozzles are certified to provide a full cone spray pattern of uniform distribution at 18L per minute at 40 p.s.i.

Meets ASTM E 1417 requirements producing a coarse spray for low-pressure rinsing of penetrate material from parts specified for use on aircraft parts.

Sure Shot Aluminium Sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents, and lubricants. They use readily available compressed air, instead of flammable or dangerous propellants, and because they are reusable you don’t have to worry about disposal of empty cans.

The Sherwin Wash Test Panel is used to determine the intrinsic level of background fluorescence in a penetrant system.

The Sherwin Wash Test Panel is used to determine the intrinsic level of background fluorescence in a penetrant system.

The Sherwin Twin KDS Panels are two panels, each measuring two by six inches and having five sunburst style cracks included in a brittle metal plating, which has a depth of approximately 0.001 inches (26µm). The cracks run along one side of each panel, top to bottom, in varying diameters. Adjacent to the cracked portion is an unplated strip of medium rough, grit-blasted stainless steel for removability evaluation.

The Sherwin KDS Panels were explicitly designed as a realistic means for complying with the ASTM E-1417 requirement that in-use penetrants be compared side-by-side to new, unused penetrants. Sherwin Twin KDS Panels give accurate, reliable information not obtainable by referring to impressionistic verbal data or nonfluorescent photographs.

The “Penetrant System Monitoring Panel” provides a quick means of determining the continued serviceability of liquid penetrant inspection system: fluorescent or visible; water-washable; post emulsifiable, or pre-wash.

The Elcometer 113 Magnetic Thermometer continuously indicates the surface temperature of steel and other magnetic material. This instrument features two high-temperature alnico magnets that act as the thermometer’s base and hold the instrument in place.

The Reference Block is a permanently magnetised steel disc containing coarse and fine cracks that have been induced onto the surface through a special treatment. The surface is then ground and coated. The disc is used to test the performance of the magnetic particle materials and lighting environment being used and to check the sensitivity of the materials on a daily basis for material degradation and/or bath contamination. A reference photograph accompanies the Reference Block so the existing bath can be compared to indications from an optimum system.

Pocket magnetometers are fast and easy to use. The quantitative information secured can be extremely valuable to personnel in the tool room, stock room, inspection, engineering and laboratory, as well as in many production processes.