No information

Rinsing solution is to be used at the end of each working day with DAF-3000.

Remove active ingredient bottle from the DAF3000 and wipe the dip tube.

Install Rinsing Solution bottle and connect it to the DAF-3000 with the dip tube.

Follow instruction of the DAF-3000 for rinsing:

“R” to be pressed to initiate rinsing of the DAF-3000

The rinsing operation time is normally 2’30″

At the end of the rinsing operation, remove the bottle and wipe the dip tube.

Reminder: Do not store or transport the DAF-3000 with a bottle in it, connected or not with the dip tube.

No information

Liquid product:

Appearance: Colourless liquid

Density: 1.0g/ml+-0.1

pH: 6.0 – 7.0

Shelf life: 24 months

Wipes:

100% viscose 60g/m2

60 x 35 mm.

Code	Product	Units/carton	Carton weight (Kg)	Carton dimension (cm)
AR0005847	Rinsing Solution for DAF-3000	6 x 2L bottles of Rinsing Solution & 6 x rolls of 10 compressed wipes	14.0	27 x 28 x 28

Specifically designed to meet the specific constraints and needs of the medical, hotel, food industry and transport sectors such as aviation, railway, ships, roads (Buses).

The DAF 3000 allows 3 different applications:

1. Disinfection up to 250m3 (bactericidal, fungicidal, virucidal and myco-bactericidal).

Use with Netbiokem DSAM or Ki-ose RTU disinfectant cleaners.

2. Disinsection up to 450m3 (flying and crawling insects).

Use with Emuldry 50 Plus or Airez remanent insecticides.

3. Odor elimination up to 450m3 (organic odor, food, animals).

Use with Aero Odor Eliminator.

1. Clean the room up prior to treatment taking place.

2. Cover any fire alarms and smoke detection systems until the fogging process is complete.

3. Turn all fans and air ventilation systems to off, or as low as possible until the fogging process is complete.

4. Close all external openings (doors and windows) and seal any gaps under & around doors.

5. Open closets and drawers that require treatment.

6. Place the device on a clean and dry surface at a height of 50 cm to 1 m depending on the height of the space to be treated.

7. Install the device near a door and near an electrical outlet.

8. Direct the nozzle (2) towards the centre of the room, with no obstacle within 2 meters. If the room is equipped with and air ventilation circuit, place the device opposite the air suction system.

9. Install and connect the Netbiokem DSAM+ inside the machine.

10. Select the required treatment: Disinsection, Disinfection or odor treatment.

11. Enter the volume to be treated in m3 and press the START button.

12. Exit the room and close the doors. Automatic startup after 45 seconds.

13. Do not enter the room for at least 30minutes after misting has been completed.

14. Start ventilation or aerate the room before entering.

See user manual for more details

NATO NSN codes:

DAF-3000 220V/50hz (EU) 8125-14-5994674 (1 DAF-3000 EU plug F type)

DAF-3000 115V/60hz (US) 8125-14-5994983 (1 DAF-3000 US plug)

DAF-3000 220V/400hz (Aircraft) 8125-14-5994951 (1 DAF-3000 Aircraft plug)

Rinsing Solution for DAF-3000 6840-14-5995151 (1 carton : 6 x 2L jerrycan + 6 x 10 wipes)

Nozzle Kit for DAF-3000 4730-14-5994981 (1 kit for yearly change of the suction nozzle)

Weight: 6.3 kg

Power: 1000 Watts

Flow rate depending on product: 18 to 27ml/min

Product loading: 2 liter drum

Internal material : tube in polyethylene and Inox 316L

External material: polystyrene resin (ABS)

The warranty terms are detailed in the user manual.

Code	Product & Plug Type
AR0006128	DAF 3000 – 220 V / 50 Hz EU Plug – Type F
AR0006127	DAF 3000 – 115 V / 400 Hz Aircraft plug – Type A
AR0005956	DAF 3000 – 115 V / 60 Hz US plug – Type A
AR0006461	DAF 3000 – 220 V / 50 Hz AUS Plug – Type I
AR0006605	DAF 3000 – 220 V / 50 Hz UK Plug – Type G
AR0006142	Succion kit for all models

• For optimal treatment*, open all the doors. Open and empty the lockers, cupboards and storage units. Close curtains and window blinds. Remove any protective carpet covers if present.

• Turn off the air-conditioning system.

• Spray the diluted product as follows:

° 25mL/m2 on the carpets to achieve a 0,5g/m2 deposit

°10mL/m2 on the other interior surfaces to achieve a 0,2g/m2 deposit.

To treat aircraft cabins and holds, the quantities are:

. BOEING 747B: 25 litres of emulsion at 2%

. BOEING 737: 7 litres of emulsion at 2%

. DOUGLAS DC10: 16 litres of emulsion at 2%

. AIRBUS A300: 10 litres of emulsion at 2%

. AIRBUS A310: 9 litres of emulsion at 2%

• Allow for drying time, from 45 min to 1h (depending upon the temperature and humidity level in the cabin).

*Intensifying or increasing the frequency of cleaning/disinfecting surface areas may compromise the effectiveness of a residual insecticide. Localized aerosol top-up treatment may be necessary, or more frequent residual treatment.

Concentrated formula is diluted in water to obtained a solution with 2% Permethrin.

1 litre of concentrate + 24 litres of water make 25 litres of the ready to use product.

0,4 litre of concentrate + 9,6 litres of water make 10 litres of the ready to use product.

For a better homogenization of quantities exceeding 10 liters, a pre-emulsification is recommended. The dilution water temperature should be between 20 and 40°C.

See TDS for more details.

° AMS 1450

° BSS 7434

° Air France FITS 58-048-01

° Product type 18 – As part of EU Biocidal Products Regulation N°528/2012

Appearance: Liquid, yellow to brown

Odour: Characteristic, Geraniol

Active ingredients: Permethrin 25/75 (N° CAS 52645-53-1), Geraniol (N° CAS 106-24-1)

Flammability: Non-flammable

Shelf life: 2 years

Product Code	Packaging	Units/carton	CO2/units (EXW Paris)
AR0006536	1L dosing bottle	10	159.61Kg

AIREZ is an emulsifiable concentrate and must be diluted with water in the ratio of 1 litre Airez to 24 litres of water (or 200mls of Airez in 4.8 litres of water). This will give the correct diluted ready to use product and the correct amount of Permethrin (2%) as recommended and specified by the World Health Organisation and by most Quarantine authorities around the world.

Dilution should take place just prior to application. If dilution has been made more than 1 week before application, then mix or shake container before use.

Residual disinsection must only be carried out with approval from the respective Government Health &/or Quarantine Agencies in each country. For flights to Australia & New Zealand, residual Disinsection Treatment must be conducted in accordance with the procedures detailed in the AQIS/MAFBNZ Schedule of Aircraft Disinsection Procedures. Suggested means of application is by compressed air spray guns, fogging apparatus or pressure retaining sprays. Approved aircraft insecticide aerosol should be used to spray the electrically sensitive areas and cockpits.

The following are approximate guides to treat the interior surfaces of both cabin and cargo compartments depending on aircraft models. Usage may vary depending on applicator and equipment used.

A330-200 17L A380-800 35L Boeing 737-8 8L

A330-300 19L Boeing 747 34L

A350-1000 24L Boeing 787-9 20L

Refer to Quarantine procedures or contact our Technical Service

° Boeing D6-7127

° AMS 1450

° Australian Quarantine & Inspection Services

° New Zealand Ministry of Agriculture & Fisheries

° Australian Pesticides and Veterinary Medicines Authority

Appearance colour: Brown liquid

Appearance Transparency: Clear

Density @ 20 Deg.C: 0.45 +/- 0.01

Cloud Point (Deg C): Less than -4 Deg.C

Product Code	Format
4755/30	1L bottle

Disinsection of the cargo holds.

Product suitable for use in confined spaces.

To be used for cargo holds disinsection at the last port of prior to departure or on-arrival.

Note that the WHO recommends the alternative use of a single-shot aerosol can containing either 2% d-phenothrin or 2% 1R-trans-phenothrin alone, in special circumstances such as non-authorization or non-availability of the phenothrin/permethrin combination aerosol for regulatory reason, and if there is a concern about use of a permethrin aerosol in the transport of live mammals, and for small aircrafts with very small holds.

PRE-DEPARTURE PROCEDURE

Treatment must be carried out after all cargo has been loaded, and just before the hold door is closed.

Since aerosols may set off smoke alarms, be sure to advise the crew that hold spraying is about to commence.

During disinsection and for 5 min after completion of spraying, the aircraft’s air-conditioning must remain off. Recirculation fans may be left on if essential for operation of the aircraft but should be set to the lowest rate.

Aerosols must be discharged into each cargo hold in such a manner as to ensure that all parts of the cargo hold have been disinsected.

As the cargo hold door is being closed, leave just enough of an opening to stand the aerosol(s) NFAI phenothrin/permethrin can between the cargo containers.

Hold the nozzle(s) down to activate the aerosol.

When you see that the spray has been activated, close the hold door immediately, leaving the cans in place to complete the disinsection process.

Once the aircraft has reached its destination, the exhausted cans are to be collected by ground handlers.

Spraying of holds shall be carried out at a rate of 140g / 100 m3 for Fwd And Aft Holds of commercial passenger of freighter aircraft, and 55g / 100m3 for Main Deck Cargo of a freighter aircraft

ON-ARRIVAL TREATMENT PROCEDURE

Under no circumstances should a hold door be opened without approval from the local authority.

Since aerosols may set off smoke alarms, be sure to advise the crew that hold spraying is about to commence.

During disinsection and for 5 min after completion of spraying, the aircraft’s air-conditioning must be switched off. Recirculation fans may be left on if they are essential for operation of the aircraft but should be set at the lowest flow rate.

Disinsection may be done manually by directing the spray into small pressure hatches where present or by placing aerosols inside the hold.

Open the hold door by no more than 30 cm, place the aerosols inside the hold in a secure upright position, and activate the lock-down nozzle(s).

Once the spray aerosol(s) appears to be functioning correctly, immediately close the hold door to complete disinsection.

Allow 2 min for the aerosols to fully discharge, and then wait a further 5 min for saturation.

Spraying of holds shall be carried out at a rate of 140g / 100 m3 for Fwd And Aft Holds of commercial passenger of freighter aircraft, and 55g / 100m3 for Main Deck Cargo of a freighter aircraft

• Aerosol product:

° Compatible with aircraft materials: AMS 1450

Referenced on Airbus Consumable Material List: CML 11ABB2

° Compliant with WHO’s recommendations for disinsection of aircraft.

• Active ingredient:

° Assessed by W.H.O. as part of the IPCS (Int’l Programme on Chemical Safety) 1989

° Permethrin approved as per the EU Biocidal Products Regulation N°528/2012, for use as Product Type 18 (Commission Implementing Regulation (EU) n°1090/2014).

Active ingredient:

d-Phenothrin (CAS 188023-86-1) 2% w/w.

Permethrin – ratio 25/75 (CAS 52645-53-1) 2% w/w.

Aspect: Colourless to slightly yellow liquid.

Fragrance: Characteristic – peach fragrance.

Flammability: Non-flammable.

Packaging:

Aerosol

Recyclable aluminium can.

Resistance to pressure up to 18 bars.

Flow rate: Between 0.8 & 1.2 g/s as per WHO recommendations.

Code	Product	Size	Nozzle	Volume treated (m3)	Units/carton	CO2/unit (EXW Paris)
AR0000316	NFAI-150DP (#236T)	150g	Single-shot	430	50	184.14 Kg
AR0000091	NFAI-60DP (#234T)	60 g	Single-shot	170	100	Coming soon

Disinsection of the cabin, cockpit and cargo holds.

Product suitable for use in confined spaces.

Insecticide to be used in accordance with WHO’s recommended disinsection “pre-departure”, “pre-departure cargo holds”, “on-arrival” and “on-arrival cargo holds” methods.

Refer to your onboard manual for the number of cans to be used for each specific aircraft.

Air conditioning system should be switched off.

To be applied either as a one-shot or multi-shot aerosol, at a rate of 35g product 100m3 cabin volume.

Open all overhead and side-wall lockers and toilets.

‘Single-shot’ Aerosol: product is released completely, in one continuous spray. Suitable for cabin and large cargo hold treatment. Press hard on the tab until it locks. After activation (tab locked), the cannister must be held at the lowest part of its body in a vertical position, at arm’s length at shoulder level. Walk through the cabin spraying at a rate of 1 step or 1 row of seats per second (equivalent to an average of 1g per second). Direct the spray towards the ceiling and slightly behind the user until it is completely empty.

‘Multi-shot’ Aerosol: multiple-use actuator, suitable to complete treatment of small areas: cockpit, crew rest and small bulk treatment. Press the actuator, holding the aerosol vertically. Keep pressed until the right quantity is released, spraying at an average discharge rate of 1g per second. Press the actuator 3 to 4 seconds, per 10m3 of cabin volume.

Aerosol product:

° AMS 1450

° BSS 7434

° Airbus CML applications 11ABB2, 11ADC1

° Air France FITS 58-058-01

° NATO NSN: 6840-14-6023808 (30g Multi-Shot)

6840-14-5947644 (40g One-Shot)

6840-14-5874817 (60g One-Shot)

° Approved on March 27th, 2019, as a biocidal product as part of EU Biocidal Products Regulation N°528/2012.

Active ingredient:

° Assessed by WHO as part of the IPCS (Int’l Programme on Chemical Safety)

° Approved as per the EU Biocidal Products Regulation N°528/2012, for use as product type 18 (Directive n° 2013/41/UE).

Aspect: Colourless to slightly yellow liquid

Fragrance: Characteristic – Peach fragrance

Flammability: Non-flammable

Packaging: Recyclable aluminium can. Resistance to pressure up to 18 bars

Flow rate: Between 0.8 & 1.2 g/s as per WHO recommendations

Shelf life: 2 years

Product Code	Product Size	Nozzle	Volume treated (m3)	Units/carton	CO2/unit (EXW Paris)
AR0006698	NFAI-30T MULTI-SHOT (210 T/N)	30g	Multi-shot	90	50	0.20Kg
AR0006700	NFAI-40T ONE-SHOT (222 AT)	40g	Single-shot	120	50	0.23Kg
AR0006701	NFAI-60T MULTI-SHOT (222 T/N)	60g	Multi-shot	170	50	0.33Kg
AR0006702	NFAI-60T ONE-SHOT (222 T/P)	60g	Single-shot	170	50	0.33Kg
AR0006703	NFAI-100T MULTI-SHOT (203 T/N)	100g	Multi-shot	300	25	0.41Kg
AR0006704	NFAI-100T ONE-SHOT (203 T/P)	100g	Single-shot	300	25	0.41Kg

One KILBLAT HFO 250ml aerosol can treat up to 25m² of surface (10 à 12g/m²).

• Wet locations and presence of food are favorable conditions for cockroach development.

• In order to obtain maximum efficiency, it is necessary to carry out a deep cleaning of the aircraft prior to applying KILBLAT HFO.

• All bins must be empty and taken out of the aircraft.

• No food is to be present on board during the treatment.

• Only skilled staff carrying out the treatment should be on board.

1) Start the treatment from the side furthest from the open exit door.

2) Do not forget rails, spaces behind trolleys and trolley wheels.

3) Shake can well before use.

4)Hold the spray “upside down”.

5)

– Single-shot continued spraying:

Press hard on the actuator until it locks.

The spray will be continuous until the can is depleted.

-Multi-shot spraying:

Press slightly on the tab without locking it. Release to stop spraying.

Use KILBLAT HFO at a distance between 20 and 30cm away from the surface to be sprayed.

Spray the surfaces to be treated in a grid pattern, insisting on the places frequented by insects (damp areas or where there is food).

6) One KILBLAT HFO 250ml aerosol can treat up to 25m² of surface (10 à 12g/m²).

7) When applying KILBLAT HFO for the first time, or in a case of an infestation, the procedure must be repeated 3 times, with 2 week interval : 2 to 3 weeks : d0, d15 and d30.

8) KILBLAT HFO can then be applied every 2 to 3 month for maintenance.

° AMS1450

° Boeing D6-7127

° Airbus CML 11ACB1

° Air France FITS 58-042-01

No information

Product code	Product	Units/carton	CO2/unit (EXW Paris)
AR0006572	KILBLAT HFO 250ml Aerosol	12	0.76Kg
AR0000046	KILBLAT HFO 400ml Aerosol	12	1.22Kg

Specially developed for the disinfection and cleaning of surfaces in aircraft.

It is used for many applications in galleys (including surfaces in contact with food), and surfaces of trolleys, lavatories and in the cabin.

° Dilute Ki-ose® 322 Concentrate to 5% w/w (1 volume of product to 19 volume of water) for general disinfectant cleaning use, or to 10% w/w (1 volume of product to 9 volume of water) for increased antimicrobial efficacy (see below efficacy test table).
° Ki-ose® 322 Eco Dose can be poured directly into an empty 500ml spray, then topped-up with water, to obtain a 5% w/w (1:19) diluted ready to use Ki-ose® solution. For a 10% (1:9) dilution, for increased antimicrobial efficacy, pour a second sachet in the empty 500ml spray before topping-up with water.

° Spray the diluted Ki-ose® solution on the surface to be disinfected/cleaned (18 ml/m2).
° Allow to act for 5 to 15 minutes for complete disinfection before wiping dry with a lint free cloth.
° Do not rinse except if the surface is to be in contact with food.

Concentrate:

° AMS 1453

Ki-ose® diluted solution:

° AMS 1453

° AMS 1550

° BSS 7434

° D6-7127

° Airbus CML applications 11CAA1, 11AAA2, 11CBA1

° Air France FITS 58-083-02

BACTERICIDAL:

° EN 1276 Pseudomonas aeruginosa, Escherichia coli (E.coli is a surrogate to V. cholerae), Staphylococcus aureus, Enterococcus hirae surrogated bacteria for Enterobacteria.

° EN 1040 Pseudomonas aeruginosa, Staphylococcus aureus.

° EN 13623 Legionella pneumophila.

° EN 13697 Pseudomonas aeruginosa, Escherichia coli (E.coli is a surrogate to V. cholerae), Staphylococcus aureus, Enterococcus hirae surrogated bacteria for Enterobacteria.

YEASTICIDAL:

° EN 1275 Candida albicans.

° EN 1650 Candida albicans.

° EN 13697 Aspergillus brasiliensis, Candida albicans.

VIRUCIDAL:

° EN 14476 Influenza A (H1N1) surrogated virus for lipophilic viruses (Ebola, Coronavirus, Flu, Hepatitis, HIV, Rotavirus), murine norovirus [+ adenovirus when dilution 1:9].

° EN 16777 [murine norovirus + adenovirus when dilution 1:9].

Active ingredient: 2% w/w didecyldimethylammonium chloride CAS 7173-51-5

Appearance: Liquid

Colour: Colourless to yellowish

Fragrance: Floral

Bottle: recyclable HDPE

Shelf Life: 3 years

Product Code	Product	Units/carton	Carton weight (Kg)	Carton dimensions (cm)	CO2/units (EXW Paris)
AR0000259	Ki-ose 322 Concentrate 5L jerrycan	4	20.5	39 x 28 x 29	5.66Kg
AR0006618	Ki-ose 322 Concentrate 20L jerrycan	1	20.5	-	22.60Kg
AR0000037	Ki-ose 322 Eco Dose Concentrate for 500mL	24	2.0	15 x 20 x 12	Coming soon

Disinfectant cleaner for all surfaces of the aircraft

Spray NETBIOKEM DSAM onto the surface until wet.

Allow 5 minutes contact time for disinfection.

Wipe the surface with a clean dry lint free cloth.

For heavily soiled surfaces, a second application may be required.

° AMS 1526

° AMS 1452

° AMS 1453

° Boeing D6-7127

° Airbus CML 11AAA2 – 11CAA1

° Air France FITS 58-112-01

° NATO NSN:

6840-14-5994327 (5L)

6840-14-5672263 (750ml)

BACTERICIDAL:

° EN 1276 Salmonella Typhimurium, Salmonella enterica subsp. enterica serotype Typhimurium, Pseudomonas Aeruginosa, E.Coli (E.coli is a surrogate to V. cholerae), S.Aureus, Enterococcus Hirae surrogated for Enterobacterias.

° EN 13697 Pseudomonas aeruginosa, Escherichia coli (E.coli is a surrogate to V. cholerae), Staphylococcus aureus, Enterococcus hirae surrogated bacteria for Enterobacteria.

FUNGICIDAL:

° EN 13697 Aspergillus brasiliensis, Candida albicans, surrogated fungus for Aspergillus Niger.

VIRUCIDAL:

° EN14476 Influenza A (H1N1) surrogated virus for lipophilic viruses (Ebola, Coronavirus, Flu, Hepatitis, HIV, Rotavirus),adenovirus, norovirus murin, poliovirus, herpes simplex.

° EN 16777Adenovirus, murine norovirus.

MYCOBACTERICIDAL:

EN 14348 Mycobacterium avium, Mycobacterium terrae, surrogated mycobacteria for Mycobacterium Tuberculosis.

Active matter: N-(3-aminopropyl)-N-dodecylpropan-1,3-diamine, 1% w/w, CAS n° 2372-82-9

Physical state: Liquid

Colour: Colorless to yellowish

Odour: Perfumed Eucalyptus

Shelf life: 3 years

Product Code	Product	Units/carton	Carton weight (kg)	Carton dimensions (cm)	CO2/unit (EXW Paris)
AR0004470	750mL spray	12	10	35 x 27 x 24	Coming soon
AR0000280	5L jerrycan	4	21	36 x 28 x 30	Coming soon

One KILBLAT 250ml aerosol can treat up to 25m² of surface (10 à 12g/m²).

• Wet locations and presence of food are favorable conditions for cockroach development.

• In order to obtain maximum efficiency, it is necessary to carry out a deep cleaning of the aircraft prior to applying KILBLAT.

• All bins must be empty and taken out of the aircraft.

• No food is to be present on board during the treatment.

• Only skilled staff carrying out the treatment should be on board.

1) Start the treatment from the side furthest from the open exit door.

2) Do not forget rails, spaces behind trolleys and trolley wheels.

3) Shake can well before use.

4)Hold the spray “upside down”.

5)

– Single-shot continued spraying:

Press hard on the actuator until it locks.

The spray will be continuous until the can is depleted.

-Multi-shot spraying:

Press slightly on the tab without locking it. Release to stop spraying.

Use KILBLAT at a distance between 20 and 30cm away from the surface to be sprayed.

Spray the surfaces to be treated in a grid pattern, insisting on the places frequented by insects (damp areas or where there is food).

6) One KILBLAT 250ml aerosol can treat up to 25m² of surface (10 à 12g/m²).

7) When applying KILBLAT for the first time, or in a case of an infestation, the procedure must be repeated 3 times, with 2 week interval : 2 to 3 weeks : d0, d15 and d30.

8) KILBLAT can then be applied every 2 to 3 month for maintenance.

° AMS1450

° Boeing D6-7127

° Airbus CML 11ACB1

° NATO NSN: 6840-14-3575883 (Aérosol 400ml – AR0006540)

° Air France FITS 058-02-01

No information

Product code	Product	Units/carton	CO2/unit (EXW Paris)
AR0000045K	KILBLAT 250ml Aerosol	12	352.15Kg
AR0000317	KILBLAT 400ml Aerosol	12	530.00Kg