Actasol HFP is suitable for general degreasing and cleaning of all oily and soiled aircraft surfaces including wing leading and trailing edges, hydraulic pipes, landing gear and wheel wells. Actasol HFP can be used as a surface cleaner prior to painting and sealing of aircraft components.

It can remove all CIC (Corrosion Inhibiting Compounds) from all areas of aircraft, below floor structure, side wall structure, doors and wheel well areas.

It can also remove stickers, labels and adhesives easily.

1) Actasol HFP is used as supplied.

2) It can be applied by brush, rag, scotch brite pad ; Or a sprayed with gun/bottle as appropriate on the surface to be cleaned. Can also be used to impregnate dry wipes for aeronautical surface cleaning.

3) For stickers/labels with adhesives, spray Actasol HFP on and leave to dwell for 5 to 10 minutes before removing using a fine abrasive pad or scraper.

° AMS 1526

° AMS 1536

° BSS 7432

° CML 08BAA9

Appearance: Clear liquid

Flashpoint (oC) PMCC: 63

Specific Gravity (20oC): 0.758

Solubility: Not water soluble

Odour: Mild Citrus

Dry Time: Similar to water

Storage : Store with container closed at room temperature

Shelf-life: 5 years

Effect on metal: Nil

Code	Packaging	Units/carton
5353/30	1 Litre	6
5353/42	5 Litres	4
5353/51	20 Litres	Each
5353/64	200 Litres	Each

Actasol Gel is suitable for general degreasing and cleaning of all oily and soiled aircraft surfaces including wing leading and trailing edges, hydraulic pipes, landing gear and wheel wells.

Actasol Gel can be used as a surface cleaner prior to painting and sealing of aircraft components.

It can remove all CIC (Corrosion Inhibiting Compounds) from all areas of aircraft, below floor structure, side wall structure, doors and wheel well areas.

1) Actasol Gel is used as supplied.

2) Applied by brush, rag, scotch brite pad as appropriate and agitate Actasol Gel on the surface to be cleaned.

3) For stickers/labels with adhesives, leave to dwell for 5 to 10 minutes before removing using a fine abrasive pad or scraper. Solvent residues on cleaned fabrics can be removed using absorbent cloths or a mild alkaline cleaning solution.

° Boeing BSS7432

°AMS 1526C (Partial Testing)

Appearance: Clear thick liquid

Flashpoint (oC) PMCC: 48

Specific Gravity (20oC): 0.84

Solubility: Not water soluble

Odour: Citrus and forest mint.

Dry Time: Similar to water.

Storage: Store with container closed at room temperature.

Shelf-life: 5 years

Effect on metal: Nil

Product Code	Packaging	Units/Carton
5252/30	1 Litre	16
5252/39	4 Litres	4
5252/51	20 Litres	Each
5252/64	200 Litres	Each

Actasol is applied by brush, rag or scotch brite pad and agitated on the surface to be cleaned.

Actasol is suitable for general degreasing and cleaning of all oily and soiled aircraft surfaces including wing leading and trailing edges, hydraulic pipes, landing gear and wheel wells. It’s an excellent cleaner for components.

It can remove CIC (Corrosion Inhibiting Compounds) from all areas of aircraft; below floor structure, side wall structure, doors and wheel well areas.

Actasol can be used as a surface cleaner prior to painting and sealing.

° AMS 1526

° BSS 7432

Appearance: Water White Liquid

Flashpoint (oC) PMCC: 51

Specific Gravity (20oC): 0.84

Solubility: Not water soluble

Volatility: 100%

Toxicity: Non-Toxic

Dry Time: Similar to water

Residue: Nil

Storage: Store with container closed at room temperature

Shelf-life: 2 years

Effect on metal: Nil

Code	Packaging	Units/carton
5350/30	1 Litre	6 units
5350/42	5 Litres	4 units
5350/51	20 litres	Each
5350/64	200 Litres	Each

Citra-Safe® removes tough greases, oils, tars and other contaminates from metals, painted surfaces, ceramic, fibreglass, and many plastics. It is also effective in removing some glues, and resins, and can be used to remove oil-based stains from carpets and upholstery. Its ability to evaporate totally after use makes Citra-Safe® an ideal replacement for hazardous chlorinated solvents in cleaning electrical parts and apparatus. Its ability to safely clean polyethylene grease and “Icky Pic” from flooded telephone cables.

Due to its slow evaporation rate, it is not necessary to use as much Citra-Safe® when using chlorinated solvents. Citra-Safe® is used straight from the can and can be wiped on with a clean rag, brushed or sprayed. To decrease the drying time of the product it is suggested a fan or compressed air can be used to allow airflow over the surface being cleaned. Citra-Safe® may cause certain air rubber to swell. Citra-Safe® will also attack styrene’s and some forms of plastic. Please check prior to using.

Citra-Safe® has many applications in the aerospace and defence industries and is approved under the following Specifications:

• BOEING

]BAC 5504 cleaning prior to sealing in fuel cells

° BAC 5000 cleaning prior to general cleaning.

° BAC 5750 general solvent cleaning

• McDONNELL DOUGLAS

° DPM 638

• AIRBUS

° SIL Number 20-006- replace 1,1,1, replace Trichloroethane and Methyl Ethyl Ketone for general cleaning task.

• BOMBARDIER

° 180-9 General Solvent Cleaning.

• ROCKETDYNE DIVISION ROCKWELL INTERNATIONAL

° RB0210-028 cleaning fluid, low vapour pressure aliphatic.

• ADVANCED TECHNOLOGY LABORATORIES

° ATL 2310-0624-01 Replace 1,1,1 Trichloroethane for general solvent cleaning.

° ATL 2301-0625-01 Replace Freon 1113/IPA blend for cleaning crystal lattices.

• WESTINGHOUSE

° N53316LM.

• U.S. AIR FORCE

° T.O. 1C-135-2-5-2 Cleaning prior to sealing in fuel cells KC13

° T.O. 1-1-8 Application and Removal of Organic Coatings, Aerospace and Non-Aerospace equipment.

• U.S. DEPARTMENT OF DEFENCE

° Military Specification MIL-C-81964A Avionic Cleaner

• U.S. ARMY

° TB 43-0135 Recommended substitutes for ozone depleting substances used on communications – electronic equipment.

Appearance: Clear liquid

Specific Gravity: 0.84 – 0.85

Flash Point: 51° (PMCC)

Toxicity: Non-Toxic

Electrical Strength: 250 kV (250,000 volts)

Drying time: Similar to water

Residue after Evaporation: Nil

Effect on Metal: Nil

Storage: 2 years shelf life

Code	Packaging	Units/carton
5100/39	5L metallic jerrycan	4
5100/51	20L metallic drum	Each
5100/64	200L metallic drum	Each

No information

CH8150HG can be used undiluted or mixed with water based on soil intensity; however, adding water will reduce its thixotropic properties. For heavy soil buildup, apply CH8150HG undiluted. Moderately soiled surfaces, mix 1 part CH8150HG with 5 parts water. For light soil, blend 1 part CH8150HG with 10 parts water, at the discretion of the airline. Dilution suggestions are provided as general references..

° Wet Wash:

Apply CH8150HG using cloth, mop, brush, pad, or spray equipment according to dilution guidelines. Distribute and agitate onto the surface, allowing up to 5 minutes for penetration. Re-agitate if necessary. Rinse with flowing water or a high-pressure washer, starting from the top and moving downward.

° Dry Wash:

For best results, dilute 1-part CH8150HG with 5 parts water. Apply on sections with a cloth or cleaning tool. Allow up to 5 minutes in heavily soiled areas before wiping with a clean cloth. Replace the cloth when saturated.

° Heavy Duty Cleaning (Landing Gear & Wheel Wells):

Apply undiluted CH8150HG on surfaces using cloth, mop, brush, pad, or spray equipment, leaving a film. Let the gel sit and soak for up to 5 minutes. Agitate the coated surface as necessary using a cloth, mop, brush, or pad. Rinse thoroughly with water after agitation.

Note: Dilution quantities can be adjusted based on specific cleaning requirements.

• AMS 1526C
• AMS 1530C
• AMS 1533C
• Boeing D6-17487 (Rev T)
• Airbus CML 08ABC1
• Bell Helicopters 00303040
• MIL-PRF 87937E

Appearance: Orange, gel liquid.
pH: 12.4 ± 0.25
pH at 10% dilution: 11.4 ± 0.3

Code	Packaging
8250/42	5L
8250/51	20L
8250/64	200L
8250/1000	1000L

°Adaptable for differente cleaning methodd: Foaming, High pressure spraying, Brush, Extra Heavy-Duty Cleaning brush or spray, Robotic machine cleaning

° Foaming Method:

Use a foam applicator and dilute 1-part CH8100G with 3-4 parts water.

° High Pressure Spraying:

Utilise high-pressure spray equipment (e.g., Graco Hydroclean equivalent) and dilute 1-part CH8100G with 50 to 100 parts water.

° Brush Applied:

For manual cleaning with soft bristle brushes or scouring pads, dilute 1-part CH8100G with 2-5 parts water.

° Extra Heavy-Duty Cleaning:

For tough, oily areas, carbon deposits, or ingrained residues in places like landing gear and wheel wells: Dilute 1-part CH8100G with 3-5 parts solvent. Apply the mixture using a brush or spray, agitate, and then rinse off.

° Robotic Machine Cleaning:

Dilute CH8100G at a ratio of 1:50 to 2:50 for use with robotic cleaning machines.

• AMS 1526C

• AMS 1530C

• Boeing D6-17487 RevT

Appearance: Yellow colour liquid

pH: 12.7 ± 0.5

Cloud Point: 7°C maximum

Product Code	Packaging	Units/Carton
2534/42	5 Litres	4
2534/51	20 Litres	Each

No information

CH8000 can be used as received or diluted with water depending upon the soil. The dilution with water will reduce the viscosity of the product.

General Dry wash for Exterior Surfaces:

1. Shake or stir well before use. Dilution prior to use (Discard diluted solutions within 24h)

Heavy soiling: use undiluted

Medium soiling: dilute 1:1 to 1:4 with water

Light soiling: dilute 1:4 to 1:8 with water.

2. Apply in smooth continuous strokes over the surface in sections, with a clean cloth, mop, brush, pad, or spray equipment. For heavy soiling, spread and agitate the product over the surface.

3. Leave the product to penetrate the soil. While the product is still wet, remove it completely by wiping with a clean microfiber/soft cotton cloth. Replace cloth before it becomes saturated with soil.

4. Repeat process if section is not clean, then continue to next section.

° AMS1526

° AMS1530

° Boeing D6-17487

° BSS7432

Appearance: Viscous, slightly hazy dark brown liquid

pH: 9.5 ± 1.0 (neat)

Shelf-Life: 2 Years

Code	Packaging	Units/carton
2515/42	5L jerrycan	4
/2515/51	20L jerrycan	Each
2515/64	200L drum	Each

No information

General Wet wash for Exterior Surfaces:

1. Dilution prior to use:

Heavy soils: Dilute CH511C 1:2 to 1:4 with water.

Moderate soils: Dilute CH511C 1:8 to 1:10 with water.

Light Soils: Dilute CH511C 1:10 to 1:20 with water.

2. Apply the diluted CH511C on the surfaces with a clean cloth, mop brush, pad, or spray equipment.

3. Allow the product to penetrate the soil. For heavy soiling spread and agitate more largely the product over the surface.

4. Rinse with preferably a free-flowing stream of water or a high-pressure washer, starting from the top and then working downwards.

Heavy Duty Wet Cleaning for landing gear and in wheel wells:

1. Dilute CH511C 1:2 to 1:4 with water or 1:4 to 1:8 with water-miscible solvent. Mix properly for 5-10 mins.

2. Apply the product on the surfaces with a clean cloth, mop brush, pad, or spray equipment from bottom and work upwards. Allow the liquid to remain on soil to penetrate and then agitate with mops or brushes.

3. Rinse with water.

General Dry Wash for Exterior Surfaces:

1. Dilute CH511C 1:40 with water.

2. Apply in smooth continuous strokes over the surface in sections, with a clean cloth, mop, brush, pad, or spray equipment. For heavy soiling spread and agitate the product over the surface.

3. Leave the product to penetrate the soil for a few moments.

4. While the product is still wet, remove it completely by wiping with a clean microfiber/soft cotton cloth. Replace cloth before it becomes saturated with soil.

5. Repeat process if section is not clean, then continue to next section.

° AMS 1526

° AMS 1530

° AMS 1550

° Boeing D6-17487

° Boeing D6-7127

° Douglas CSD No. 1 Type 1

pH: 12.3 ± 0.5

pH at 1% dilution: 10.4 ± 0.5

Cloud Point: 7°C

Appearance: Yellow color liquid with mild odor

Code	Packaging	Units/carton
2525/42	5L jerrycan	4
2525/51	20L jerrycan	Each
2525/64	200L drum	Each

No information

General Wet wash for Exterior Surfaces:

1.Dilution prior to use as recommended below as per method of application:

Method 1: Hand Scrubbing : Using soft bristle brushes or scouring pads, dilute 1-part CH087 with 4-10 parts water.

Method 2: Foaming: Using a foam applicator, dilute 1-part CH087 with 4-5 parts water.

Method 3: High Pressure Spraying: Using high pressure spray equipment such as Graco Hydroclean equivalent, dilute 1-part CH087 with 50 to 100 parts of water.

2.Apply the diluted CH087 on the surfaces with a clean cloth, mop brush, pad, or spray equipment.

3.Allow the product to penetrate the soil. For heavy soling spread and agitate the product over the surface.

4.Rinse with preferably a free-flowing stream of water or a high pressure washer, starting from top and then working downwards.

Note: Extra Heavy-Duty Cleaning : For difficult to clean oily areas or where carbon or exhaust deposits are ingrained, landing gear and wheel wells, dilute 1-part CH087 with 1–4 parts water or 1-part CH087 to 3-5 parts solvent. Brush or spray on, agitate and spray off.

General Dry Wash for Exterior Surfaces:

1.Dilute 1 part of CH087 with 8-10 parts of water.

2.Apply in smooth continuous strokes over the surface in sections, with a clean cloth, mop, brush, pad, or spray equipment. For heavy soiling spread and agitate the product over the surface.

3.Leave to penetrate the soil.

4.While the product is still wet, remove it completely by wiping with a clean microfiber/soft cotton cloth. Replace cloth before it becomes saturated with soil.

5.Repeat process if section is not clean, then continue to next section.

° AMS 1526

° AMS1530

° AMS 1550

° Boeing BSS 7432

° Boeing D6-7127

° Douglas CSD No. 1 Type

pH: 12.0 ± 0.5

Cloud Point: 7°C

Appearance: Yellow color liquid

Code	Packaging	Units/carton
2520/42	5L jerrycan	4
2520/51	20L jerrycan	Each
2520/64	200 Litres drum	Each

Approximately 5m2 per litre

For fuselage cleaning this equates to using about 66 gallons (250 litres) for a Boeing 747 and 60 gallons (230 litres) for an Airbus A300-600.

1.For best results, wash and dry the aircraft prior to applying polish.

2.Apply Aeroglaze neat by rag, pad or mop head and wipe onto a cool surface, out of direct sunlight.

3.Clean and polish the surfaces by a circular motion over a four-foot (1.2M) area.

4.Allow to dry and then polish off with a dry soft cloth.

5.Change the dirty cloth regularly for better results.

° Douglas CSD 1 – Type V

° Boeing D6-17487

° AMS 1650

Appearance: Off white opaque highly viscous

Liquid Odour: Characteristic solvent odour

pH: 9.5 ± 0.5

Stability in storage: Freezes at – 10⁰C. Product can be used in sub-zero temperatures

Code	Packaging	Units/carton
2700/30	1L bottle	6
2700/51	20L jerrycan	Each
2700/64	200L drum	Each