CH8150HG Exterior Cleaner

High-Gloss Effective Aerocare Gel for Aircraft Exterior

Extended Cleaning Time: Its viscous (thixotropic) formula enhances adhesion, boosting cleaning power and reducing manual effort.
Effective Pollution Removal: Rapidly eliminates dirt, grease, carbon, and exhaust residues within minutes of application.
Environmentally Friendly: Contains 98% Biosourced Ingredients, meeting EU Ecolabel, CleanGredients, and Safer Choice standards. Free of harmful substances, ensuring minimal environmental impact.
High-Gloss Finish: Leaves surfaces clean without streaks, making it ideal option for dry wash applications.
Safe and Non-Toxic: Non-flammable with zero VOCs, suitable for all metal and painted surfaces, ensuring safety during application.
Easy Rinsing: Controlled foam simplifies rinsing, enhancing user convenience.

DESCRIPTION

Aerocare Gel CH8150HG is high-gloss aircraft approved is 98% biosourced cleaning gel specifically formulated to significantly reduce the time and level of manual effort required for the cleaning. Designed for easy cleaning of heavily soiled sections of the aircraft, such as the lower fuselage, wing flaps, and the nose wheel well, it is suitable for both wet & dry wash applications. With results seen in under 3mins.

It’s biodegradable, solvent-free, fragrance-free, and free from harmful chemicals.

APPLICATION AREAS

No information

DIRECTIONS FOR USE

CH8150HG can be used undiluted or mixed with water based on soil intensity; however, adding water will reduce its thixotropic properties. For heavy soil buildup, apply CH8150HG undiluted. Moderately soiled surfaces, mix 1 part CH8150HG with 5 parts water. For light soil, blend 1 part CH8150HG with 10 parts water, at the discretion of the airline. Dilution suggestions are provided as general references..

° Wet Wash:

Apply CH8150HG using cloth, mop, brush, pad, or spray equipment according to dilution guidelines. Distribute and agitate onto the surface, allowing up to 5 minutes for penetration. Re-agitate if necessary. Rinse with flowing water or a high-pressure washer, starting from the top and moving downward.

° Dry Wash:

For best results, dilute 1-part CH8150HG with 5 parts water. Apply on sections with a cloth or cleaning tool. Allow up to 5 minutes in heavily soiled areas before wiping with a clean cloth. Replace the cloth when saturated.

° Heavy Duty Cleaning (Landing Gear & Wheel Wells):

Apply undiluted CH8150HG on surfaces using cloth, mop, brush, pad, or spray equipment, leaving a film. Let the gel sit and soak for up to 5 minutes. Agitate the coated surface as necessary using a cloth, mop, brush, or pad. Rinse thoroughly with water after agitation.

Note: Dilution quantities can be adjusted based on specific cleaning requirements.